How do I press DTF transfers?

You can apply your DTF transfers using an iron or a heat press. Both are easy, beginner-friendly options. Using an iron is great for the at home DIYers, while the heat press is more popular for larger scale operations.

Using an iron

If you're using an iron, we've found that the wool/cotton setting works best. Prepare your garment by ironing it without the DTF transfer first. Make sure you do not have the steam setting on! This will prep your surface. Then, position the transfer print side down and iron for about 20 seconds, using consistent smooth movement the entire time. Allow your garment to cool for about a minute, and then gently peel the DTF transfer backing off.

For more detailed instructions and images, check out How to apply DTF transfers with an iron.

Using a heat press

If you're using a heat press, the idea is similar to that of an iron. You'll preheat the press to about 150°C. Lay the garment as flat as possible and press it for about 10 seconds to smooth the fabric. Place the transfer print side down and press again for about 20 seconds with firm, even pressure. Then, remove the garment and allow it to cool until it's slightly warm to the touch. Finally, slowly peel the transfer backing away.

For step by step instructions on using a heat press, check out How to apply DTF transfers with a heat press.